|
6#
楼主 |
发表于 2019-12-28 20:09:36
|
只看该作者
This GEMPACK log file was created at 20:05:04 on 28-DEC-2019 by the program
<peelas.for 16-MAY-2013 (a TABLO-generated program)>
which accesses some of the routines in the GEMPACK software release
<GEMPACK Release 11.2.001 May 2013>
(Processing command line options.)
(Opening log file 'PEELAST.log')
(Opened new text file 'c:\rungtap370\work\PEELAST.log'.)
Sending output just to a log file
<peelas.for 16-MAY-2013 (a TABLO-generated program)>
This program accesses some of the routines in the GEMPACK software release
<GEMPACK Release 11.2.001 May 2013>
-------------------------------------------------------
! GEMPACK Software System Licence !
! Limited Size Executable-image Licence for GEMPACK !
! Licence No. GEI-9999 !
! Licence for Release 12.0 of GEMPACK !
! Installer-generated expiring licence. Ask !
! sales at gempack.com for a permanent licence. !
! (Your GEMPACK licence expires on 21-JUN-2020.) !
-------------------------------------------------------
<< COPYRIGHT 1987-2010: CoPS/Impact and KPSOFT >>
Current directory is: c:\rungtap370\work
Full path name of running EXE is: c:\rungtap370\peelas.exe
Fortran compiler = IF32 version 11.10, build date 20100806
Op system is: [2:6:2:9200]
Operating system is a successor to Windows 7
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
TABLO-GENERATED PROGRAM OPTIONS
( --> indicates those in effect )
BAT Run in batch STI Take inputs from a Stored-input file
BPR Brief prompts SIF Store inputs on a file
--> LOG Output to log file ASI Add to incomplete Stored-input file
CMF Take inputs from a Command file
EAA Echo all activity SVX Select variables on XAC file (later)
CPU Report CPU times RQF Required figures agreement (extrap)
NRP Don't reuse pivots NIR Don't do solution iterative refinement
--> IZ1 Ignore zero coefficients in step 1
KZ2 Keep zero coefficients in steps 2,3 etc
NEQ Do no equations NWE Don't warn how well equations solved
NDS Do no displays SSI Several subintervals; extrap after each
NWR Do no writes M28 Use MA28 routines (rather than MA48)
NAS Do no assertions SUI Save updated formula(initial) data
NUD Do no final updates Extra Options Screen
NSM Don't do simulation --------------------
NWT Use Newton's method DTO Display, Terminal/Text write Options
CR Check-on-read options
Select an option : <opt> Deselect an option : -<opt>
Help for an option : ?<opt> Help on all options : ??
Redisplay options : / Finish option selection : Carriage return
(Opened, as text, existing file 'c:\rungtap370\work\PEELAST.cmf'.)
(Taking inputs from a command file.)
(Opened, as text, existing file 'c:\rungtap370\work\PEELAST.cmf'.)
! (There is no CREATION information on this file.)
--> Reading the Command file.
! This Command file
! c:\rungtap370\work\PeeLast.cmf
! was written by RunGTAP (Version 3.70 built 31/Jul/2018)
aux files = c:\rungtap370\PEELAS;
file gtapsets = c:\rungtap370\newver13\sets.har;
file gtapdata = c:\rungtap370\newver13\basedata.har;
file gtapparm = c:\rungtap370\newver13\default.prm;
file ELASTICITIES = c:\rungtap370\newver13\default.pel;
(Finished reading the command file.)
Auxiliary Statement File
------------------------
(Opened, as binary, existing file 'c:\rungtap370\peelas.axs'.)
Auxiliary Table File
--------------------
(Opened, as binary, existing file 'c:\rungtap370\peelas.axt'.)
! This file was created at 15:56:49 on 16-MAY-2013 by the program
! <TABLO Version 6.4 April 2012>
! which accesses some of the routines in the GEMPACK software release
! <GEMPACK Release 11.2.001 May 2013>
! [The program which created this file was compiled with IF32.]
[Auxiliary Table File was created by TABLO at 15:56:49 on 16-MAY-2013.]
[TABLO file used here is "peelas.tab".]
[No TABLO STI file used when TABLO was run.]
[This TG-program was created by TABLO at 15:56:49 on 16-MAY-2013.]
[Starting to check "extra" statements on the Command file.]
[Finished checking "extra" statements on the Command file.]
++++++++++++++++++++++++++++++++++++++++++++++++++
This program was written by the GEMPACK program TABLO
as described in the Information file
'peelas.inf'
This run of the TABLO-generated program
o can carry out 12 WRITEs
++++++++++++++++++++++++++++++++++++++++++++++++++
(Range test of initial values will produce warnings.)
(Data file with logical name 'GTAPDATA')
(Opened, as header, existing file 'c:\rungtap370\newver13\basedata.har'.)
! This file was created at 18:35:17 on 14-DEC-2019 by the program
! <aggdat.for 10-FEB-2016> [aggdat.tab]
! which accesses some of the routines in the GEMPACK software release
! <GEMPACK Release 11.3.001 May 2014>
! [The program which created this file was compiled with GF32.]
(Data file with logical name 'GTAPPARM')
(Opened, as header, existing file 'c:\rungtap370\newver13\default.prm'.)
! This file was created at 18:35:17 on 14-DEC-2019 by the program
! <aggpar.for 10-FEB-2016> [aggpar.tab]
! which accesses some of the routines in the GEMPACK software release
! <GEMPACK Release 11.3.001 May 2014>
! [The program which created this file was compiled with GF32.]
(Data file with logical name 'GTAPSETS')
(Opened, as header, existing file 'c:\rungtap370\newver13\sets.har'.)
! This file was created at 18:35:17 on 14-DEC-2019 by the program
! <aggdat.for 10-FEB-2016> [aggdat.tab]
! which accesses some of the routines in the GEMPACK software release
! <GEMPACK Release 11.3.001 May 2014>
! [The program which created this file was compiled with GF32.]
(Data file with logical name 'ELASTICITIES')
(Opened new header file 'c:\rungtap370\newver13\default.pel'.)
---> Beginning the preliminary pass (aimed at sets and subsets).
Set 'REG'
(Opened, as header, existing file 'c:\rungtap370\newver13\sets.har'.)
(10 character strings, each of length 12 read. Header 'H1 ')
[Set has size 10.]
Set 'TRAD_COMM'
(8 character strings, each of length 12 read. Header 'H2 ')
[Set has size 8.]
Set 'CGDS_COMM'
(1 character strings, each of length 12 read. Header 'H9 ')
[Set has size 1.]
Set 'ENDW_COMM'
(5 character strings, each of length 12 read. Header 'H6 ')
[Set has size 5.]
Set 'ENDWC_COMM'
[Set has size 1.]
Set 'PROD_COMM'
[Set has size 9.]
'TRAD_COMM' as a subset of 'PROD_COMM'
'CGDS_COMM' as a subset of 'PROD_COMM'
Set 'DEMD_COMM'
[Set has size 13.]
'ENDW_COMM' as a subset of 'DEMD_COMM'
'TRAD_COMM' as a subset of 'DEMD_COMM'
Set 'NSAV_COMM'
[Set has size 14.]
'DEMD_COMM' as a subset of 'NSAV_COMM'
'CGDS_COMM' as a subset of 'NSAV_COMM'
'PROD_COMM' as a subset of 'NSAV_COMM'
'ENDWC_COMM' as a subset of 'NSAV_COMM'
Set 'ELASTCOMP'
[Set has size 2.]
Total memory currently used for all arrays is approximately 0.08 megabytes.
[Add about 5-10 megabytes for the memory used by the code.]
---> Beginning the reads, formulas (etc).
(Opened, as header, existing file 'c:\rungtap370\newver13\basedata.har'.)
Reading 'EVOA'
(Read real array, size 5x10, header "EVOA".)
Reading 'EVFA'
(Read real array, size 5x9x10, header "EVFA".)
Reading 'VIFA'
(Read real array, size 8x9x10, header "VIFA".)
Reading 'VDFA'
(Read real array, size 8x9x10, header "VDFA".)
Reading 'VIPA'
(Read real array, size 8x10, header "VIPA".)
Reading 'VDPA'
(Read real array, size 8x10, header "VDPA".)
Reading 'VDFM'
(Read real array, size 8x9x10, header "VDFM".)
Reading 'VIMS'
(Read real array, size 8x10x10, header "VIMS".)
Reading 'VXWD'
(Read real array, size 8x10x10, header "VXWD".)
Formula for 'VFA'
Formula for 'VFA'
Formula for 'VOA'
Formula for 'VOA'
Formula for 'VPA'
(Opened, as header, existing file 'c:\rungtap370\newver13\default.prm'.)
Reading 'INCPAR'
Expecting data of size 8x10 but found
data of size 4x10x1x1x1x1x1 on the file.
Amount of data at header 'INCP' is not as expected.
(ERROR RETURN FROM ROUTINE: FGR7CESS)
(E-Unexpected amount of data)
(ERROR RETURN FROM ROUTINE: TGGR7C)
(ERROR RETURN FROM ROUTINE: TGSCRS)
(ERROR RETURN FROM ROUTINE: M00001)
(ERROR RETURN FROM ROUTINE: TGPROG)
(%%Information. Retained (possibly incomplete) file
'c:\rungtap370\newver13\default.pel'.)
Inputs have been taken from the Command file
PEELAST.cmf
(The program terminated with an error.)
Total elapsed time is: less than one second.
This run ended at 20:05:04 on 28-DEC-2019 |
|